One of my favorite photos from last year. Never posted this photo for some reason. Can't wait to go out camping again! 🏕️
Yep. It's time for a snow wheeling trip. Aiming for this weekend if possible. Just need to put the truck back together, get it aligned and get the co2 filled and then it's party time!
Also on a side note: this photo is from the old camera I used. Paired with a 50 f/1.8 it's pretty fun to use. Might be time to break out the 50mm again.
On another side note: here's an After and Before image. Why? I don't know. I think before and after photos are pretty neat. The dynamic range, or range of colors that the camera's sensor can see, wasn't great on the old camera, but I was still able to pull some 'good' color out. Best I could do for a 13 year old camera.
to simpler times. Sometimes I think this sort of set up, with a few changes, would be nearly perfect for me.
Need to go on another adventure soon. Where should I go?
I wanted to eventually install dual cases in my truck, but I was going to postpone this mod until I could afford a different setup, but one thing led to another and an few phone calls and text messages later, this happened. Going to be a little bit before I can get it installed in my truck, mainly still waiting on parts, but this is going to be a big change for the truck. Can't wait for some Summer rock crawling now! 😁
Finally feeling better so was able to finish the tear down of the A340 transfer case.
One interesting thing I didn't notice until I went to pull the cross member is that the driver side mounts outside the frame rail while the passenger side mounts to the inside of the frame rail.
Found some paint pen marks on the output shaft, makes me wonder if that is from the factory or somebody worked on this thing before.
The last gear section probably weighs was much as the geared dual cases..thinking the truck actually may end up lighter by a few pounds
Anybody need some auto t/c parts? Free just cover shipping
#a340 #2ndgen #4runner #sas #toyotabuiltnotbought #lowrangeoffroad @official_trailgear #classictoyotatrucks #2ndgen4runnermafia #inchwormgear #toyota
Tires and centers installed.
Cage build, fit before it was painted, and rear winch
Prepped for some colors, and some scary steering
Trim and tailgate install.
Ready to do battle with my #inchwormgear @lowrangeoffroad
adapter. Going to finish drilling out all the holes and then going to put the seal housing in the back of the trans. @marlincrawler
duals will have to wait until I get an extra set of hands.
New trans mount, repainted crossmember in and all torqued down, sad part is it's probably going to end up getting cut out for the @4wheelunderground #3link
kit. I'm also very close to pulling the transfer case, and putting my geared case adapter #inchwormgear
duals in. The shortened drive shaft is already in and I already pulled the console just need an extra set of hands. I already know I'm going to have to bend the triple sticks closer to driver side to clear that automatic trans shifter gate